BACKEND TECO1



Relisys RELI 2412 (no ADF, no transparency adapter)
single pass scanner - 300*1200 dpi - 8.5*14
Inquiry:
   000: 06 00 02 02 30 00 00 10 52 45 4c 49 53 59 53 20    ....0...RELISYS 
   016: 56 4d 33 35 33 30 2b 20 20 20 20 20 20 20 20 20    VM3530+         
   032: 31 2e 30 38 31 2e 30 38 02 00 54 45 43 4f 20 56    1.081.08..TECO V
   048: 4d 33 35 33 41                                     M353A
Inquiry page 0x82
   000: 06 82 00 12 11 54 45 43 4f 20 56 4d 33 35 33 41    .....TECO VM353A
   016: 20 56 31 2e 30 36                                   V1.06

AVEC Colour 2412
three pass scanner - 300*600 dpi - 8.5*14
    000: 06 00 02 02 30 00 00 10 20 20 20 20 20 20 20 20    ....0...        
    016: 49 6d 61 67 65 20 53 63 61 6e 6e 65 72 20 20 20    Image Scanner   
    032: 31 2e 30 38 31 2e 30 38 02 00 54 45 43 4f 20 56    1.081.08..TECO V
    048: 4d 33 35 32 41                                     M352A

Avec Color Office 2400 (no ADF, no transparency adapter)
three pass scanner - 300*600 dpi - 8.5*14
Inquiry:
   000: 06 00 02 02 30 00 00 10 20 20 20 20 20 20 20 20    ....0...        
   016: 49 6d 61 67 65 20 53 63 61 6e 6e 65 72 20 20 20    Image Scanner   
   032: 32 2e 30 34 32 2e 30 34 02 00 54 45 43 4f 20 56    2.042.04..TECO V
   048: 4d 33 35 32 30                                     M3520
Inquiry page 0x82
   000: 06 82 00 12 11 54 45 43 4f 20 56 4d 33 35 32 30    .....TECO VM3520
   016: 20 56 32 2e 30 34                                   V2.04

RELI 4830 (no ADF, with transparency adapter)
   000: 06 00 02 02 30 00 00 10 52 45 4c 49 53 59 53 20    ....0...RELISYS 
   016: 52 45 4c 49 20 34 38 33 30 20 20 20 20 20 20 20    RELI 4830       
   032: 31 2e 30 33 31 2e 30 33 02 00 54 45 43 4f 20 56    1.031.03..TECO V
   048: 4d 34 35 34 32                                     M4542
Inquiry page 0x82
   000: 06 82 00 12 11 54 45 43 4f 20 56 4d 34 35 34 32    .....TECO VM4542
   016: 20 56 31 2e 30 33                                  V1.03

Dextra DF-600P - VM3510
   000: 06 00 02 02 24 00 00 10 44 46 2D 36 30 30 4D 20    ....$...DF-600M 
   016: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20                     
   032: 31 2E 31 37 31 2E 31 37 02                         1.171.17.       


/*--------------------------------------------------------------------------*/

SCSI commands supported by the RELISYS VM3530+:

TEST UNIT READY
00 00 00 00 00 00

REQ SENSE  
03 00 00 00 12 00

VENDOR-09
09 00 00 78 00 00
  3-4 = length of data to receive. Always 30720 bytes. 
        Probably 12 lines of calibration at 300dpi. 
        8.5*300*12=30600

VENDOR-0E (?)
0E 00 00 00 00 00
  Always follows VENDOR-09 command

INQUIRY:
12 00 00 00 35 00
12 01 82 00 21 00
  standard inquiry
    52 bytes - appears to never change
    32-39: firmware version
    42-52: real scanner name

  page 0x82 (vendor specific) - real scanner name with version
     0-3 = page header
       4 = string length 
    5-21 = real scanner name with version

MODE SELECT
15 10 00 00 18 00
  always sends:
    00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 01 
	03 06 02 00 00 01 00 00 


SCAN
1B 00 00 00 00 00

SET WINDOW
24 00 00 00 00 00 00 00 63 00 
Total length is 99
  07 = length (99-8 = 91)
  10-11 = X Resolution
  12-13 = Y resolution
  14-17 = X top left corner
  18-21 = Y top left corner
  22-25 = width  (size in inches * 300)
  26-29 = length (size in inches * 300)
  31 = 0x80 ?
  33 = scan mode
        0x00 = black & white
        0x02 = grayscale
		0x05 = color
  34 = bit depth? - invariants, always 8
  36 = dither pattern - only for B&W
     0x00 = line art
	 0x01 = 2 X 2
	 0x02 = 3 X 3
	 0x03 = 4 X 4 Bayer
	 0x04 = 4 X 4 Smooth
	 0x05 = 8 X 8 Bayer
	 0x06 = 8 X 8 Smooth
	 0x07 = 8 X 8 Horizontal
	 0x08 = 8 X 8 Vertical
  37 = 
     0x80 = RIF (VM353A only?)
  63 = calibration?
        0x00 yes
        0x02 no
  81 = ??? transparency adapter
        0x00 no
        0x01 yes
  93 =
     0x80 = ? (seems to activate a contrast value on VM353A)

  37, 55, 57, 59, 61, 65, 67, 69, 71, 73, 75, 77, 79 = 0x80 
  85, 89, 93, 97 = 0xff
  
READ
28 00 00 00 00 00 00 00 3E 00
  6-8 = length

SEND
2A 00 03 00 00 02 00 04 00 00
  2 = data type code
       0x03 = gamma - 4*256 bytes

GET DATA BUFFER STATUS
34 01 00 00 00 00 00 00 12 00
  1 = bit 1 is wait
  7-8 allocation length

  returned buffer is 0x10 bytes long.
    0-2 = additional length (0x10-3 = 0x0D)
      3 = reserved(?)
      8 = ? 
   9-11 = filled data buffer
  12-13 = number of lines (constant during a scan)
  14-15 = bytes per line (constant during a scan)  


/*--------------------------------------------------------------------------*/

Command sequence
(simplified, since the TWAIN driver seems to be quite stupid)

Get some info:
  INQUIRY
  INQUIRY page 0x82

Setup the scan:
  TUR
  MODE SELECT
  SET WINDOWS
  GET BUFFER STATUS
  VENDOR-09
  VENDOR-0E
  SEND(10)
  SET WINDOWS (same as the first one)
  SCAN

loop until all data read:
  GET BUFFER STATUS
  READ(10) if any data available

park the CCD:
  SET WINDOWS
  SCAN

/*--------------------------------------------------------------------------*/

The vendor specific command 0x09 and 0x0e are issued by the windows driver to the AVEC 2400, but the scanner rejects them.

/*--------------------------------------------------------------------------*/

The Dextra DF600-P is a VM3510. It's older than the other scanner and
is a little more primitive. The driver recognizes its scsi id and fake
a more evolved one. The scan sequence is also simplified. The rest is
identical.